FAQ
Arrow Selection
Choosing the right arrows depends on your bow type, draw weight, arrow length and shooting discipline. Our AXIRA Arrow Guide helps you find suitable arrows for your setup. For additional advice, consult an authorized AXIRA dealer.
Arrow length depends on your draw length, bow setup and the clearance needed for safe shooting. It is measured from the deepest point of the nock groove, where the bowstring sits, to the cut end of the shaft. The point and point insert are not included in this measurement.
Carbon arrows are constructed from carbon fiber and offer a strong balance of weight, stiffness and durability. Aluminum/carbon arrows combine carbon construction with an aluminum core, allowing different shaft characteristics and designs. Neither construction is automatically better. The right choice depends on your shooting discipline, bow setup and preferred arrow characteristics.
AXIRA uses a straightforward naming system to help you understand each shaft's characteristics. The number indicates the shaft diameter, while the letters describe its construction or design.
- ABX: Aluminum Barrel Extreme
- APX: Aluminum Parallel Extreme
- CPX: Carbon Parallel Extreme
- SF: Superfast (lightweight)
- MX: Max
For example, the AXIRA 3.2 CPX is a 3.2 mm full-carbon parallel shaft.
Arrow Specifications
Straightness tolerance indicates how straight an arrow shaft is manufactured. A ±0.001" tolerance allows a deviation of no more than 0.001 inch. Smaller tolerances mean tighter straightness specifications and less variation between shafts.
AXIRA Spine Align Technology identifies and aligns each shaft's most consistent spine orientation. This helps improve arrow-to-arrow consistency, contributing to tighter groupings and more accurate shooting.
AXIRA Precision Coating is a specialized shaft finish designed to reduce surface friction and allow smoother arrow removal from targets. Its optimized surface properties complement the shaft's carbon construction while supporting durability and ease of use.
Parallel arrows maintain a consistent shaft diameter along their length. Barreled arrows have a varying diameter, typically wider in the middle and narrower toward the ends. This design changes how weight and stiffness are distributed along the shaft. Both constructions have advantages depending on the bow setup, shooting discipline and desired arrow characteristics.
Components & Setup
Component compatibility depends on your AXIRA arrow model and shaft specifications. Use our Component Finder on the Components page to find compatible points, inserts, nocks and other components for your specific arrow model.
Point weight influences an arrow's dynamic spine, which describes how the shaft behaves during the shot. A heavier point generally makes an arrow react dynamically weaker, while a lighter point makes it react dynamically stiffer. Changing point weight also affects total arrow weight and balance, so your setup may require additional tuning.
Arrow shafts can generally be cut to the required length, provided the shaft design allows it and the correct cutting equipment is used. Cutting an arrow shorter also affects its dynamic spine. Always confirm the correct length before cutting and follow any model-specific cutting instructions. For the best results, have your arrows prepared by an experienced archery dealer.
Maintenance
Carbon arrows do not have a fixed lifespan. With proper care, they can withstand extensive regular use, but their condition depends on impacts, handling and storage. Always inspect your arrows before shooting.
Inspect the entire shaft for cracks, splinters, dents, unusual bends or damaged ends. Pay particular attention to the areas around the nock and point, especially after a hard impact. Do not shoot an arrow if you suspect structural damage. When in doubt, replace the shaft rather than risk shooting a damaged arrow.
Yes, arrow nocks and points can generally be replaced, provided the shaft is undamaged and the replacement components are compatible. Use our Component Finder to find the correct nocks and points for your AXIRA arrow model.
Clean your arrows with a soft cloth and, when appropriate for the shaft finish, a mild cleaning solution. Avoid aggressive chemicals, excessive heat and abrasive materials. Regularly inspect the shafts, nocks, points and fletching for wear or damage. Store your arrows in a protective case or arrow tube to prevent unnecessary impacts.
Buying & Support
AXIRA products are distributed by JVD Archery and available exclusively through authorised JVD dealers. Visit your local archery shop and ask for AXIRA to explore our full range.
We would like to redirect you to the dealer where you have bought your products for help with your warranty claim. This dealer will contact our distributor JVD Archery if needed. If the shop you have bought your product from doesn’t exist anymore we would like to ask you to contact our distributor JVD Archery by e-mail.
To become an authorised AXIRA dealer, you’ll need to apply through our official distributor. Once approved, you’ll gain access to our full product range and dealer support.
📩 Apply now via our distributor JVD Archery and start selling AXIRA!
About AXIRA
AXIRA takes a straightforward approach to arrow quality. Every model is developed around clearly defined specifications and offered in one quality grade. Rather than creating multiple grades of the same arrow, we focus on controlled manufacturing standards, relevant technical specifications and clear product choices. Different arrows for different shooting needs. One defined standard for every model.
Every AXIRA model has one clearly defined quality standard. Models have different specifications to suit different needs. Each is presented with its own straightness tolerance, dimensions and spine options.
No. Every AXIRA arrow model is built to one clearly defined standard. Different models have different specifications to meet different shooting needs, but we never offer lower-quality grades within the same model. You always know exactly what you're getting. One Standard. Every Arrow.